Epoxy Coating on Floors: 3 Types of Floors That Must Be Avoided

When it comes to flooring, there is a well-known term called epoxy flooring. Epoxy floors are the kind of floors that are considered durable, high-performing, and reliable for industrial or commercial buildings.

Epoxy coating is applied on a concrete surface of a floor. This coating gives the floor strength, smoothness, and leads to its high performance. Suitable for the commercial use, this coating makes the floor strong enough to endure heavy loads. Also, the coatings make sure that the floor lasts for a longer time, hence, making it more durable.

Getting the Epoxy Coating Done

The epoxy coatings are done on the floors of buildings like warehouses, industries, or commercial buildings. It is the most convenient way to maintain the floors of these buildings and keep them in a good condition for years!

To get the epoxy coating done, the surface that is required as a base should be clean and somewhat porous in nature. The epoxy coatings perfectly stick to such surfaces. It is not recommended applying the coating on a floor that is smooth and new. The surface should be old and rough for proper adherence of the coating.

Before epoxy coatings are applied, all kinds of floors must be repaired well in advance. This means that any cracks or damages must be fixed beforehand. Also, the surface must not be oily or greasy when the coating is applied.

Floors to Avoid Epoxy Coatings

There are a number of floor types on which the epoxy coatings must not be applied. The three major types of floors on which epoxy coating must be avoided are mentioned below:

  • Wood floors

Wood floors are not considered a suitable choice to get the epoxy coating done. The reason behind this is that for epoxy coating, a base surface is needed that is concrete and hard. In case of wood, it flexes, gets swollen, and even moves. This makes the wood floors incompatible with the epoxy coatings.

There can be a few types of wood floors that can handle the epoxy coating. However, the installation of wood floors is usually done with the help of adhesives, polishes, and other chemical substances that deter the bond of epoxy with the floor.

  • Tile floors

There is a wide variety of tiles available for different types of floors. There is one kind of tile made for the kitchen and the other kind made for the bathroom. The different types of tiles are compatible with epoxy coating differently.

The bond of the coating with the tile depends upon the material used for the formation of tiles. For instance, the tiles found in kitchen and bathrooms have grout in between them. This grout contains polymer or cement which can help the epoxy coating hold a good grip on the surface.

However, still, the floors with concrete and cement hold the coating better than tiled surfaces.

  • Uncoated or damaged floors

Never go for the epoxy coating if the floor has cracks or is chipped. This interferes with the installation and bonding of the coating with the floor.

In case someone has to coat such flooring, they need to fix the floor first and then go for the coating!

These were the three floors to avoid epoxy coating. When installing, it is to bekept in note thatthe coating is done rightly and serves the right purpose.



Leave a Reply

Your email address will not be published. Required fields are marked *